6 Most Important Scrap Metal Recovery Tools

It’s important to become very efficient at recovering scrap metal from such a wide range of materials when recycling scrap metals becomes a major pastime or a source of extra revenue. With the correct instruments, scrap metal recycling may be a breeze. Most scrap metal recyclers should have a few of these important instruments on hand.

Most of the scraping tools you’ll need may be found in your garage’s toolbox. Scrap metal recycling can benefit greatly from the usage of these ordinary tools:

Remove metal pieces and disassemble equipment with the use of a screwdriver.

You can remove screws using a power drill, allowing you to dismantle equipment to get to the scrap metal inside.

Using a hammer to dismantle a piece of broken equipment may be the most efficient way to get at the metal components. When you need to shatter anything into small, more manageable bits, you can use a hammer to do so.

Tools for opening and breaking down massive materials include the crowbar and pry bars.

Wrench — When dismantling equipment, you need a wrench to assist you remove hard-to-reach and tight pieces.

WD-40 — That might not seem like a scrap metal recycling tool, but WD-40 is useful for protecting your scrap metal recycling tools from corrosion.

Keeping these instruments close at hand while scraping metal is a good idea since you may require one or more of those to help you recover metal from a variety of sources.

Wire Stripper

A significant amount of wire and cable will likely be scrapped if you are serious about generating money from scrap metal recycling. You can get a better price for copper wire or cable if you remove the insulation before selling it to a scrap yard. Stripping wires using a razor and pliers takes a long time, therefore if you want to earn more money by stripping more wires, you may consider purchasing a wire stripper. A portable wire remover is probably all you need if you use less than 100 pounds of wire a month. Tabletop wire stripping machines or electric wire strippers should be used for more than that. You’ll make a lot more money recycling scrap metal with these scraping tools.

A Hand Truck with a Set of Buckets and Straps

Scrap metal is heavy and bulky, so you’ll need heavy-duty scraping equipment to help you move it. You’ll want to be able to carry all of your scrap metal at once, whether you do it at home or in a workshop. Scrap metal may be transported from your workspace to your vehicle and then to the scrap yard using buckets, straps, and a hand truck. Keep your cargo secure on the road to the scrapyard by purchasing a set of high-quality ratchet straps. In order to keep tiny scrap metal pieces from being lost in transit, buckets are a must.

Reciprocating Saw on a Cordless System

As a scrapper, you may require a scrapping tool that will allow you to securely and easily cut through metal and other materials in order to access additional parts and components. In addition to its ability to cut through metal, a cordless reciprocating saw may be used in any location thanks to its cordless design. Make sure you don’t damage yourself by handling the tool or any sharp metal components.

A Metal File

For any scrapper, a metal file is a must-have. Increasingly, metals are being coated to protect them from the environment and to safeguard their users from electric shocks. Non-ferrous metals like copper and plastic are frequently used as plating to protect ferrous metals. You can use a metal file to remove the protective coating to see what kind of metal is beneath. Using this scrapping tool will help you identify your scrap metals so that you can estimate the value of your cargo at the scrap yard.


Having a magnet in your scrapping arsenal is perhaps the most critical scrapping equipment you can have. There is no need for a powerful magnet, only a basic fridge magnet. The simplest and easiest approach to determine if a metal is ferrous or nonferrous is to use a magnet. Non-ferrous metals will not be attracted by your magnet since ferrous metals contain iron and are thus magnetic. Before you start working on your trash, it’s a good idea to identify the different types of metals present. This will also help you figure out the value of your haul so that you can receive the greatest price at a scrap yard.